Öffentliche Ausschreibung Darmstadt 2025 Deutschland – Absperrventile – Radiation hard Vacuum Valves with small conductance for SFRS 2025-03-07

Deutschland – Absperrventile – Radiation hard Vacuum Valves with small conductance for SFRS

1. Beschaffer

1.1.

Beschaffer

Offizielle Bezeichnung: FAIR - Facility for Antiproton and Ion Research in Europe GmbH

E-Mail: [gelöscht]

Rechtsform des Erwerbers: Von einer zentralen Regierungsbehörde kontrolliertes öffentliches Unternehmen

Tätigkeit des öffentlichen Auftraggebers: Bildung

2. Verfahren

2.1.

Verfahren

Titel: Radiation hard Vacuum Valves with small conductance for SFRS

Beschreibung: With the FAIR project (Facility for Antiproton and Ion Research), a state-of-the-art particle accelerator and experimental facility for basic and applied research is being realized in cooperation with 16 partner countries at the GSI Helmholtzzentrum für Schwerionenforschung GmbH (GSI) site in Darmstadt. As part of the tender, 6 different types of elastomer sealed vacuum valves are to be procured. They differ in their nominal sizes (DN16, DN25 & DN40), flange types (CF or ISO-KF) and actuator (manual or electro-pneumatic). In addition, these valves must be resistant to radiation up to a defined level. These different valve types are used in nine different applications.

Kennung des Verfahrens: 00311f07-c532-4d5a-9806-de52e71277b5

Interne Kennung: 33/2600025074FAIR

Verfahrensart: Offenes Verfahren

Das Verfahren wird beschleunigt: nein

2.1.1.

Zweck

Art des Auftrags: Lieferungen

Haupteinstufung (cpv): 42131148 Absperrventile

2.1.2.

Erfüllungsort

Postanschrift: Planckstr. 1

Stadt: Darmstadt

Postleitzahl: 64291

Land, Gliederung (NUTS): Darmstadt, Kreisfreie Stadt (DE711)

Land: Deutschland

2.1.4.

Allgemeine Informationen

Zusätzliche Informationen: Bekanntmachungs-ID: CXS0YYEYTHAENW8E The only form of submission of tender (offer) accepted by Awarding Authority is in writing, electronically Note: In Writing, Electronically tender (offer) shall be submitted electronically within the deadline via the German awarding platform DTVP. URL: http://www.dtvp.de/Center/ The forms and other documents to be completed, provided by FAIR, may be - either completed on the online tendering tool under the section "Documents to Be Completed" or - created and compiled separately by Candidate together with the other components of the participation application or offer (concepts or explanations etc.), then uploaded under the heading "Own Documents". However, Candidates should not fill in the forms online and upload them again separately, as this can result in transmission errors and increases the workload on both sides. In order to comply with the text form (in writing) according to § 126b BGB [transl.: German Civil Code] when submitting participation applications, Candidates must provide the following information: - In the case of natural persons, the full name (first name and surname) must be given (name of the declaring person in the participation application form). - In the case of legal entities and commercial companies and corporations, the name of the company and its legal form must be stated. In addition, the full name of the employee who is submitting the participation application on behalf of the company (name of the declaring person in the participation application form) must be stated. The insertion of a company logo is not sufficient. - In the case of Bidding Consortia, the declaring person according to § 126b BGB shall be the employee of the leading member who submits the participation application on behalf of the Bidding Consortium; besides, the form "Bidding Consortium Declaration" must be submitted. It should be noted that in the case of electronic submission, the text form according to § 126b BGB is only observed if the participation applications are transmitted in encrypted form via the awarding platform (cf. information on eVergabe). Submitting the tender (offer) via email is not sufficient. In the case of incorrect/ incomplete information that violates the aforementioned formal requirements, tender (offer) will be excluded unless Candidate cannot be held responsible (§ 57 para. 1 nr. 1, para. 3 VgV). ----------------------- Note: Weighting Best possible rating is 10 and worst possible rating is 0; 70 % price 30 % performance criteria - Performance criteria: 30% are scaled to 100% 1. Delivery time (60 %) - It is particularly important to the client that the bidder specifies a delivery time that is comprehensible to the client, and that the project planning is presented in as much detail as possible in a plausible manner. The bidder with the shortest time is awarded the most points. 2. Maintenance (40%) - Low maintenance is particularly important to the client. For the pneumatic valves, an additional 1 point is awarded for overfulfilment of the specification of 50% and an additional 2 points for 100%.----------------------- Note: Communication with Candidates Communication with Candidates takes place via the DTVP's tender platform. Questions must be sent to FAIR via DTVP and will are answered via DTVP. Questions posed orally or by telephone regarding the documents or the contractual object will not be answered; answers given orally or by telephone are not binding. ------------------------ Note: Electronic Invoicing "The XInvoicing format is accepted with additional transmission of the invoice as a -pdf-."

Rechtsgrundlage:

Richtlinie 2014/24/EU

vgv -

2.1.6.

Ausschlussgründe

Rein innerstaatliche Ausschlussgründe: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Der Zahlungsunfähigkeit vergleichbare Lage gemäß nationaler Rechtsvorschriften: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Korruption: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Beteiligung an einer kriminellen Vereinigung: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Vereinbarungen mit anderen Wirtschaftsteilnehmern zur Verzerrung des Wettbewerbs: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Verstoß gegen umweltrechtliche Verpflichtungen: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Geldwäsche oder Terrorismusfinanzierung: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Betrugsbekämpfung: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Kinderarbeit und andere Formen des Menschenhandels: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Zahlungsunfähigkeit: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Verstoß gegen arbeitsrechtliche Verpflichtungen: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Verwaltung der Vermögenswerte durch einen Insolvenzverwalter: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Falsche Angaben, verweigerte Informationen, die nicht in der Lage sind, die erforderlichen Unterlagen vorzulegen, und haben vertrauliche Informationen über dieses Verfahren erhalten.: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Interessenkonflikt aufgrund seiner Teilnahme an dem Vergabeverfahren: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Direkte oder indirekte Beteiligung an der Vorbereitung des Vergabeverfahrens: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Schwere Verfehlung im Rahmen der beruflichen Tätigkeit: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Vorzeitige Beendigung, Schadensersatz oder andere vergleichbare Sanktionen: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Verstoß gegen sozialrechtliche Verpflichtungen: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Zahlung der Sozialversicherungsbeiträge: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Einstellung der gewerblichen Tätigkeit: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Entrichtung von Steuern: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

Terroristische Straftaten oder Straftaten im Zusammenhang mit terroristischen Aktivitäten: Please see GSI Form Suitability: self-declaration of suitability in accordance with Sections 123, 124 GWB as part of the suitability documents submitted by the company!

5. Los

5.1.

Los: LOT-0001

Titel: Radiation hard Vacuum Valves with small conductance for SFRS

Beschreibung: 6 different type of radiation hard valves (at least 10^5Gy), with 3 different nominal sizes, two different flange types (CF and ISO-KF) and two different actuators in total ~350pcs

Interne Kennung: 33/2600025074FAIR

5.1.1.

Zweck

Art des Auftrags: Lieferungen

Haupteinstufung (cpv): 42131148 Absperrventile

5.1.2.

Erfüllungsort

Postanschrift: Planckstr. 1

Stadt: Darmstadt

Postleitzahl: 64291

Land, Gliederung (NUTS): Darmstadt, Kreisfreie Stadt (DE711)

Land: Deutschland

5.1.3.

Geschätzte Dauer

Laufzeit: 9 Monate

5.1.4.

Verlängerung

Maximale Verlängerungen: 0

5.1.6.

Allgemeine Informationen

Die Namen und beruflichen Qualifikationen des zur Auftragsausführung eingesetzten Personals sind anzugeben: Nicht erforderlich

Auftragsvergabeprojekt nicht aus EU-Mitteln finanziert

Die Beschaffung fällt unter das Übereinkommen über das öffentliche Beschaffungswesen: ja

Diese Auftragsvergabe ist auch für kleine und mittlere Unternehmen (KMU) geeignet: nein

5.1.7.

Strategische Auftragsvergabe

Ziel der strategischen Auftragsvergabe: Keine strategische Beschaffung

5.1.9.

Eignungskriterien

Kriterium:

Art: Wirtschaftliche und finanzielle Leistungsfähigkeit

Bezeichnung: Wirtschaftliche und finanzielle Leistungsfähigkeit

Beschreibung: - Creditworthiness check (To be submitted with on request of contracting authority by means of third party confirmation): Carried out by FAIR GmbH as part of the suitability check. - Proof of compulsory commercial/professional liability insurance (request by means of self-declaration): Information about the insurance provider and the amount of coverage on the FAIR preprinted form On the part of FAIR here a 3-fold coverage in relation to the order value is demanded.

Kriterium:

Art: Sonstiges

Bezeichnung: Sonstiges

Beschreibung: Supporting documents: - Russia sanctions - Declaration on Regulation (EU) 833/2014 (To be submitted with the tender by means of self-declaration): On 08.04.2022, the Council of the European Union adopted Regulation (EU) 2022/576 amending Regulation (EU) No 833/2014 concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine. This entered into force on 09.04.2022. As a regulation, it has direct legal effect in the member states and has a direct impact on the award of public contracts and concessions. - Sub-contractor Declaration (To be submitted with the tender by means of self-declaration): Only to be completed if partial services are to be passed on to sub-contractors or if the applicant/bidder is using a sub-contractor to demonstrate suitability. In this case, this must be submitted with the request to participate/the offer. A declaration of availability (see Declaration of Availability form) from the sub-contractor must also be submitted with the request to participate/the offer in case of hired competence. In case of partial performance by the sub-contractor, the declaration will be requested before the award of the contract. - Declaration of Availability - Sub-contractor Declaration (To be submitted with the tender by means of self-declaration): Only to be completed in parallel with the "Sub-contractor Declaration" and signed by the sub-contractor if partial services are to be passed on to sub-contractors (performance by sub-contractor) or if the applicant/bidder is using a sub-contractor to demonstrate suitability (hired competence - see Sub-contractor form). In the event that more than one sub-contractor is being used, several copies of this form should be filled out. One declaration of commitment should be submitted per sub-contractor. - Further bidder information - EU wide tendering procedures (so-called eForms) (To be submitted with the tender by means of self-declaration): In the context of the introduction of new stipulations for EU-wide tendering procedures (so-called eForms), public clients have been required since 25 October 2023 to publish the contractor information listed in any contract notices (previously contract award notices).

Kriterium:

Art: Eignung zur Berufsausübung

Bezeichnung: Eignung zur Berufsausübung

Beschreibung: - Self-declaration of suitability pursuant to Sections 123, 124 GWB (To be submitted with the participation request by means of self-declaration): Self-declaration of possessing the knowledge pursuant to Sections 123, 124 GWB is incorrect and that the cases mentioned therein do not apply - FAIR preprinted form - With the information asked for on the FAIR preprinted form, the number of employees over the previous three years - on the FAIR preprinted form under Company profile - Information on overall revenues and order-specific revenue Declaration of the total company turnover and the turnover in relation to the particular type of service to which the award relates, in both cases, in relation to the last 3 financial years - on the FAIR preprinted form under Company presentation. - Act Regulating a General Minimum Wage (Mindestlohngesetz - MiLoG) (To be submitted with the tender by means of self-declaration): Declaration as per Section 19 (3) MiLoG - FAIR preprinted form - Declaration of compliance with data protection requirements (To be submitted with the tender by means of self-declaration)

Kriterium:

Art: Technische und berufliche Leistungsfähigkeit

Bezeichnung: Technische und berufliche Leistungsfähigkeit

Beschreibung: Description of reference projects: Description of three comparable reference projects, maximum five reference projects, including the project data asked for on the FAIR preprinted form. At least 3 relevant for track record in manufacturing of such valves and their use in particle accelerators (in-cluding pictures).

5.1.10.

Zuschlagskriterien

Kriterium:

Art: Preis

Bezeichnung: Preis

Beschreibung: Preiskriterium für "Preis-Quotient-Methode"

Kategorie des Gewicht-Zuschlagskriteriums: Gewichtung (Punkte, genau)

Zuschlagskriterium — Zahl: 70

Kriterium:

Art: Qualität

Bezeichnung: Delivery time

Beschreibung: It is particularly important to the client that the bidder specifies a delivery time that is comprehensible to the client, and that the project planning is presented in as much detail as possible in a plausible manner. The bidder with the shortest time is awarded the most points.

Kategorie des Gewicht-Zuschlagskriteriums: Gewichtung (Punkte, genau)

Zuschlagskriterium — Zahl: 18

Kriterium:

Art: Qualität

Bezeichnung: Maintenance

Beschreibung: Low maintenance is particularly important to the client. For the pneumatic valves, an additional 1 point is awarded for overfulfilment of the specification of 50% and an additional 2 points for 100%.

Kategorie des Gewicht-Zuschlagskriteriums: Gewichtung (Punkte, genau)

Zuschlagskriterium — Zahl: 12

5.1.11.

Auftragsunterlagen

Sprachen, in denen die Auftragsunterlagen offiziell verfügbar sind: Englisch

Frist für die Anforderung zusätzlicher Informationen: 26/03/2025 23:59:59 (UTC+1)

Internetadresse der Auftragsunterlagen: https://www.dtvp.de/Satellite/notice/CXS0YYEYTHAENW8E/documents

Ad-hoc-Kommunikationskanal:

URL: https://www.dtvp.de/Satellite/notice/CXS0YYEYTHAENW8E

5.1.12.

Bedingungen für die Auftragsvergabe

Bedingungen für die Einreichung:

Elektronische Einreichung: Erforderlich

Adresse für die Einreichung: https://www.dtvp.de/Satellite/notice/CXS0YYEYTHAENW8E

Sprachen, in denen Angebote oder Teilnahmeanträge eingereicht werden können: Deutsch, Englisch

Elektronischer Katalog: Nicht zulässig

Varianten: Nicht zulässig

Die Bieter können mehrere Angebote einreichen: Nicht zulässig

Beschreibung der finanziellen Sicherheit: Advance payments required within the realm of a contract to be concluded (down payments) shall only be paid upon the presentation of an unlimited suretyship with assumption by principal debtor. As a general rule, FAIR GmbH only accepts suretyships which meet the following minimum conditions: - Guarantees with debts owed as a principal debtor waiving the defence of §§ 770, 771 BGB - only suretyships under German law - suretyships are irrevocable - free of charge for FAIR GmbH - issued by a reputable international, preferably European bank - usually for an indefinite period or a period linked to the date ownership transfer took place" The suretyship can be transmitted via SWIFT. Transmission via SWIFT is not a condition.

Frist für den Eingang der Angebote: 08/04/2025 12:00:00 (UTC+2)

Frist, bis zu der das Angebot gültig sein muss: 52 Tage

Informationen, die nach Ablauf der Einreichungsfrist ergänzt werden können:

Nach Ermessen des Käufers können alle fehlenden Bieterunterlagen nach Fristablauf nachgereicht werden.

Zusätzliche Informationen: FAIR reserves the right to make a one-off additional request for documents within a period to be specified in the additional request letter in accordance with § 56 VgV. However, applicants cannot rely on a subsequent request.

Informationen über die öffentliche Angebotsöffnung:

Eröffnungsdatum: 08/04/2025 12:00:00 (UTC+2)

Auftragsbedingungen:

Die Auftragsausführung muss im Rahmen von Programmen für geschützte Beschäftigungsverhältnisse erfolgen: Nein

Bedingungen für die Ausführung des Auftrags: BGB company with joint and several liability with listing of all members and their authorised representatives incl. naming of an authorised representative who shall represent the consortium in a legally binding manner vis-à-vis the Contracting authority. The tender must be accompanied by a legally binding declaration signed by all joint members that the lead firm, as authorised representative, represents the joint members listed before the Contracting authority and is jointly and severally liable, having an effect on each member, for performing the service in accordance with the contract.

Elektronische Rechnungsstellung: Erforderlich

Aufträge werden elektronisch erteilt: ja

Zahlungen werden elektronisch geleistet: ja

Von einer Bietergemeinschaft, die den Zuschlag erhält, anzunehmende Rechtsform: BGB company with joint and several liability with listing of all members and their authorised representatives incl. naming of an authorised representative who shall represent the consortium in a legally binding manner vis-à-vis the Contracting authority. The tender must be accompanied by a legally binding declaration signed by all joint members that the lead firm, as authorised representative, represents the joint members listed before the Contracting authority and is jointly and severally liable, having an effect on each member, for performing the service in accordance with the contract.

5.1.15.

Techniken

Rahmenvereinbarung: Keine Rahmenvereinbarung

Informationen über das dynamische Beschaffungssystem: Kein dynamisches Beschaffungssystem

Elektronische Auktion: nein

5.1.16.

Weitere Informationen, Schlichtung und Nachprüfung

Überprüfungsstelle: Vergabekammer des Bundes

Informationen über die Überprüfungsfristen: The competent investigating authority is as follows Vergabekammer des Bundes Villemombler Str. 76 D-53123 Bonn, Germany Tel.: 0228 9499-0 Fax: 02[gelöscht] Email: [gelöscht] Web: http://www.bundeskartellamt.de/SharedDocs/Kontaktdaten/DE/Vergabekammern.html Candidate/ Bidder is requested to clearly identify those sections of the tender that contain a trade or business secret. If Bidder fails to do so, the Public Pro-curement Tribunal may, in the case of a review procedure, assume that Bidder has agreed to have these documents inspected (§165 para. 3 GWB). As Awarding Authority, FAIR is obliged to make the tender file available to the Public Procure-ment Tribunal immediately when initiating a review procedure (§ 163 para. 2 cl. 3 GWB). Candidates/ Bidders have a right to expect the contracting authority's compliance with the Bidder-protecting provisions re: the tender procedure (§ 97 para. 6 GWB). If Candidate/ Bidder interested in the contract considers that Bidder's rights have been infringed through failure to comply with award regulations, the infringement must be reported to FAIR within ten calendar days (§ 160 para. 3 cl. 1 no. 1 GWB). Infringements identifiable on the basis of the announcement or the award doc-uments must be asserted against FAIR within the deadline for submission of ten-ders specified in the announcement (§ 160 para. 3 cl. 1 nr. 2 - 3 GWB). If FAIR informs Candidate/ Bidder that FAIR is unwilling to redress its complaint, it is possible to file an appeal for review with the aforementioned Public Procure-ment Tribunal within 15 days of receipt of the notification (§ 160 para. 3 cl. 1 no. 4 GWB). Bidders whose tenders are not to be considered for the award will be informed prior to the award according to § 134 GWB. A contract may only be concluded 15 calendar days after this information has been sent by FAIR. In the case of trans-mission by fax or electronic means, this period shall be ten calendar days. It commences on the day after dispatch of the information by FAIR. After this peri-od has expired, a surcharge is possible, even if the deadline is not passed accord-ing to § 160 para. 3 GWB. An application for review would therefore have to be delivered to FAIR by the Public Procurement Tribunal before the expiry of the deadline according to § 134 GWB in order to prevent a surcharge. According to § 135 para. 1 and 2 GWB, the ineffectiveness of a commission can only be established if it has been asserted in the review procedure within 30 cal-endar days of the conclusion of the contract but not later than six months after the conclusion of the contract. If the contracting entity has published the award in Amtsblatt der Europäischen Union [transl.: Official Journal of the European Union], the period unenforceability shall end 30 calendar days after announce-ment of the publication of the award in the Amtsblatt der Europäischen Union. Information pursuant to Art. 13 GDPR on the processing of your personal data within the scope of our business relationship is available at: www.gsi.de/data-protection FAIR - Facility for Antiproton and Ion Research in Europe GmbH

Organisation, die zusätzliche Informationen über das Vergabeverfahren bereitstellt: FAIR - Facility for Antiproton and Ion Research in Europe GmbH

Organisation, die weitere Informationen für die Nachprüfungsverfahren bereitstellt: Vergabekammer des Bundes

Organisation, die Teilnahmeanträge entgegennimmt: FAIR - Facility for Antiproton and Ion Research in Europe GmbH

TED eSender: Datenservice Öffentlicher Einkauf (in Verantwortung des Beschaffungsamts des BMI)

8. Organisationen

8.1.

ORG-0001

Offizielle Bezeichnung: FAIR - Facility for Antiproton and Ion Research in Europe GmbH

Registrierungsnummer: DE 275 595 927

Postanschrift: Planckstr. 1

Stadt: Darmstadt

Postleitzahl: 64291

Land, Gliederung (NUTS): Darmstadt, Kreisfreie Stadt (DE711)

Land: Deutschland

E-Mail: [gelöscht]

Telefon: +49 6159 711987

Rollen dieser Organisation:

Beschaffer

Organisation, die zusätzliche Informationen über das Vergabeverfahren bereitstellt

Organisation, die Teilnahmeanträge entgegennimmt

8.1.

ORG-0002

Offizielle Bezeichnung: Vergabekammer des Bundes

Registrierungsnummer: 022894990

Postanschrift: Villemomblerstr. 76

Stadt: Bonn

Postleitzahl: 53123

Land, Gliederung (NUTS): Bonn, Kreisfreie Stadt (DEA22)

Land: Deutschland

Kontaktperson: Vergabekammer des Bundes

E-Mail: [gelöscht]

Telefon: [gelöscht]

Rollen dieser Organisation:

Überprüfungsstelle

Organisation, die weitere Informationen für die Nachprüfungsverfahren bereitstellt

8.1.

ORG-0003

Offizielle Bezeichnung: Datenservice Öffentlicher Einkauf (in Verantwortung des Beschaffungsamts des BMI)

Registrierungsnummer: 0204:994-DOEVD-83

Stadt: Bonn

Postleitzahl: 53119

Land, Gliederung (NUTS): Bonn, Kreisfreie Stadt (DEA22)

Land: Deutschland

E-Mail: [gelöscht]

Telefon: +49228996100

Rollen dieser Organisation:

TED eSender

Informationen zur Bekanntmachung

Kennung/Fassung der Bekanntmachung: 169be916-ab6c-4dbe-91e1-9d65226f78d4 - 01

Formulartyp: Wettbewerb

Art der Bekanntmachung: Auftrags- oder Konzessionsbekanntmachung – Standardregelung

Unterart der Bekanntmachung: 16

Datum der Übermittlung der Bekanntmachung: 06/03/2025 13:00:21 (UTC+1)

Sprachen, in denen diese Bekanntmachung offiziell verfügbar ist: Englisch

Veröffentlichungsnummer der Bekanntmachung: 149507-2025

ABl. S – Nummer der Ausgabe: 47/2025

Datum der Veröffentlichung: 07/03/2025

Datenschutzerklärung